product key technologies
Water-filled hot water bag (rubber/silicone) storage
1. Rinse and dry: After cooling, drain all the water. Open the lid and hang upside down or leave it open to air dry until completely dry. Blow to prevent sticking.
2. Cleaning and maintenance: Gently wipe off stains with a soft cloth. Avoid oil, acids, alkalis and hard brushes; if stained with oil, wash with water and dry.
3. Long-term storage: Sprinkle a thin layer of talcum powder to prevent sticking. Tighten the cap, place flat in a cool and dry box, protect from light, heat, sharp objects and chemicals.
4. Regular inspection: Check once every 1-2 months. If there is hardening, cracks, stickiness, leakage or aging of the gasket, replace immediately.
Charging the hot water bag for storage
1. Basic cleaning: After cooling, wipe with a soft cloth. Do not wash the body with water. Check that the power cord is intact and undamaged.
2. Storage in environment: In an independent and dry place, away from sunlight, heat sources, humidity and sharp objects; avoid folding or squeezing the wiring.
3. Safety limit: If the product has exceeded the expiration period (recommended 2-3 years) or the wiring is aging, unable to charge, bulging and leaking liquid, immediately stop using.
General Tips for Avoiding Pitfalls
- Avoid direct sunlight and do not place it near stoves or heaters for baking; this can cause the rubber to age and become brittle.
- Do not store it together with camphor balls, oil stains, or acidic and alkaline chemicals.
- Do not fold or apply excessive pressure; this can lead to damage to the seal and structure.
